164 research outputs found

    Engineering Calibration and Physical Principles of GNSS-Reflectometry for Earth Remote Sensing

    Full text link
    The Cyclone Global Navigation Satellite System (CYGNSS) is a NASA mission that uses 32 Global Positioning System (GPS) satellites as active sources and 8 CYGNSS satellites as passive receivers to measure ocean surface roughness and wind speed, as well as soil moisture and flood inundation over land. This dissertation addresses two major aspects of engineering calibration: (1) characterization of the GPS effective isotropic radiated power (EIRP) for calibration of normalized bistatic radar cross section (NBRCS) observables; and (2) development of an end-to-end calibration approach using modeling and measurements of ocean surface mean square slope (MSS). To estimate the GPS transmit power, a ground-based GPS constellation power monitor (GCPM) system has been built to accurately and precisely measure the direct GPS signals. The transmit power of the L1 coarse/acquisition (C/A) code of the full GPS constellation is estimated using an optimal search algorithm. Updated values for transmit power have been successfully applied to CYGNSS L1B calibration and found to significantly reduce the PRN dependence of CYGNSS L1 and L2 data products. The gain pattern of each GPS satellite’s transmit antenna for the L1 C/A signal is determined from measurements of signal strength received by the 8-satellite CYGNSS constellation. Determination of GPS patterns requires knowledge of CYGNSS patterns and vice versa, so a procedure is developed to solve for both of them iteratively. The new GPS and CYGNSS patterns have been incorporated into the science data processing algorithm used by the CYGNSS mission and result in improved calibration performance. Variable transmit power by numerous Block IIF and IIR-M GPS space vehicles has been observed due to their flex power mode. Non-uniformity in the GPS antenna gain patterns further complicates EIRP estimation. A dynamic calibration approach is developed to further address GPS EIRP variability. It uses measurements by the direct received GPS signal to estimate GPS EIRP in the specular reflected direction and then incorporates them into the calibration of NBRCS. Dynamic EIRP calibration instantaneously detects and corrects for power fluctuations in the GPS transmitters and significantly reduces errors due to GPS antenna gain azimuthal asymmetry. It allows observations with the most variable Block IIF transmitters (approximately 37% of the GPS constellation) to be included in the standard data products and further improves the calibration quality of the NBRCS. A physics-based approach is then proposed to examine potential calibration errors and to further improve the Level 1 calibration. The mean square slope (mss) is a key physical parameter that relates the ocean surface properties (wave spectra) to the CYGNSS measurement of NBRCS. An approach to model the mss for validation with CYGNSS mss data is developed by adding the contribution of a high frequency tail to the WAVEWATCH III (WW3) mss. It is demonstrated that the ratio of CYGNSS mss to modified WW3 mss can be used to diagnose potential calibration errors that exist in the Level 1 calibration algorithm. This approach can help to improve CYGNSS data quality, including the Level 1 NBRCS and Level 2 ocean surface wind speed and roughness. The engineering calibration methods presented in this dissertation make significant contributions to the spatial coverage, calibration quality of the measured NBRCS and the geophysical data products produced by the NASA CYGNSS mission. The research is also useful to the system design, science investigation and engineering calibration of future GNSS-reflectometry missions.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/168052/1/wangtl_1.pd

    Dual – loop force – displacement mixed control strategy and its application on the quasi – static test

    Get PDF
    The Quasi-static test is a well-known powerful methodology to evaluate the seismic performance of structural components and systems. One of the most important challenges in the Quasi-static testing is to achieve precise boundary conditions, especially for the axial loading of vertical components. The requirement of synchronized displacement loading and target axial force formed a pair of contradiction. A dual-loop force-displacement mixed control strategy is proposed. The presented approach is successfully verified through the quasi-static testing for a full-scale concrete filled steel tube column. The control targets are achieved with an excellent control performance

    Traffic Volume Forecasting Model of Freeway Toll Stations During Holidays – An SVM Model

    Get PDF
    Support vector machine (SVM) models have good performance in predicting daily traffic volume at toll stations, however, they cannot accurately predict holiday traffic volume. Therefore, an improved SVM model is proposed in this paper. The paper takes a toll station in Heilongjiang, China as an example, and uses the daily traffic volume as the learning set. The current and previous 7-day traffic volumes are used as the dependent and independent variables for model learning, respectively. This paper found that the basic SVM model is not accurate enough to forecast the traffic volume during holidays. To improve the model accuracy, this paper first used the SVM model to forecast non-holiday traffic volumes, and proposed a prediction method using quarterly conversion coefficients combined with the SVM model to construct an improved SVM model. The result of the prediction showed that the improved SVM model in this paper was able to effectively improve accuracy, making it better than in the basic SVM and GBDT model, thus proving the feasibility of the improved SVM model

    Transport Anisotropy in One-dimensional Graphene Superlattice in the High Kronig-Penney Potential Limit

    Full text link
    One-dimensional graphene superlattice subjected to strong Kronig-Penney (KP) potential is promising for achieving electron lensing effect, while previous studies utilizing the modulated dielectric gates can only yield a moderate, spatially dispersed potential profile. Here, we realize high KP potential modulation of graphene via nanoscale ferroelectric domain gating. Graphene transistors are fabricated on PbZr0.2_{0.2}Ti0.8_{0.8}O3_{3} back-gates patterned with periodic, 100-200 nm wide stripe domains. Due to band reconstruction, the h-BN top-gating induces satellite Dirac points in samples with current along the superlattice vector s^\hat{s}, a feature absent in samples with current perpendicular to s^\hat{s}. The satellite Dirac point position scales with the superlattice period (LL) as Lβ\propto L^{\beta}, with β=1.18±0.06\beta = -1.18 \pm 0.06. These results can be well explained by the high KP potential scenario, with the Fermi velocity perpendicular to s^\hat{s} quenched to about 1% of that for pristine graphene. Our study presents a promising material platform for realizing electron supercollimation and investigating flat band phenomena.Comment: 12 pages, 5 figures, and Supplemental Materia

    Do Infants Learn Words from Statistics? Evidence from English-Learning Infants Hearing Italian

    Get PDF
    Infants are sensitive to statistical regularities (i.e., transitional probabilities, or TPs) relevant to segmenting words in fluent speech. However, there is debate about whether tracking TPs results in representations of possible words. Infants show preferential learning of sequences with high TPs (HTPs) as object labels relative to those with low TPs (LTPs). Such findings could mean that only the HTP sequences have a word‐like status, and they are more readily mapped to a referent for that reason. But these findings could also suggest that HTP sequences are easier to encode, just like any other predictable sequence. Here we aimed to distinguish between these explanations. To do so, we built on findings that infants become resistant to learning labels that are not typical of their native language as they approach 2 years of age and add words to their lexicons. If tracking TPs in speech results in identifying candidate words, at this age TPs may have reduced power to confer lexical status when they yield a unit that is very dissimilar to word forms that are typical of infants’ native language. Indeed, we found that at 20 months, English‐learning infants with relatively small vocabularies learned HTP Italian words (but not LTP words) as object labels, while infants with larger vocabularies resisted learning HTP Italian words. These findings suggest that the HTP sequences may be represented as candidate words, and more broadly, that TP statistics are relevant to word learning

    Concepts, Structure and Developments of High-Reliability Cyber-Physical Fusion Based Coordinated Planning for Distribution System

    Get PDF
    Coordinated control is imperative for the distribution network with the integration of wind power, photovoltaic system, and energy storage system. Meanwhile, the advanced automation terminal, intelligent control technology, and information communication technologies have greatly promoted the informatization of distribution networks which also increase the correlation between the physical system (primary system) and the cyber system (secondary system). Hence, it is critical to comprehensively coordinate the planning of the cyber-physical system for building a highly reliable power grid. This work summarizes a series of challenges brought by the highly coupled cyber-physical system, such as the primary and secondary collaborated planning models and solution algorithms. Then, the reliability assessment theories of cyber-physical systems and their application in distribution network planning models are introduced. Finally, three development directions of distribution network planning in the future are proposed, considering primary and secondary system coordinated planning

    Trends of Hydroclimate Variables in the Upper Huai River Basin: Implications of Managing Water Resource for Climate Change Mitigation

    Get PDF
    The present study attempted to investigate the trends of mean annual temperature, precipitation, and streamflow changes to determine their relationships in the upper Huai river basin. The Mann–Kendall (MK), Sen's slope test estimator, and innovative trend detection (ф) (ITA) methods were used to detect the trends. According to the findings, average annual precipitation shows a descending trend (ф = −0.17) in most stations. An increasing trend was found only in Fuyang station (ф = 1.02). In all stations, the trends of mean annual temperature (ф = 0.36) were abruptly increased. During the past 57 years, the mean air temperature has considerably increased by 12°C/10a. The river streamflow showed a dramatic declining trend in all stations for the duration of the study period (1960–2016) (ф = −4.29). The climate variability in the study region affects the quantity of the streamflow. The river streamflow exhibits decreasing trends from 1965 onwards. The main possible reason for the declining stream flow in the study area is the declining amount of precipitation on some specific months due to the occurrence of climate change. The outcomes of this study could create awareness for the policymakers and members of the scientific community, informing them about the hydroclimatic evolutions across the study basin, and become an inordinate resource for advanced scientific research
    corecore